- We do machining of all materials like Aluminum, Steel, Cast iron, SG, Forging materials.
- We are Supplying products into a wide range of Industy Sectors
- Components machining are done through CNC turning centre, CNC vertical turning lathe (VTL), CNC Vertical machining centre (VMC), Conventional lathe etc.
- Our in house machining department can carry out milling, drilling, tapping, grinding and turning to meet all customers machining needs.
- Jig & fixture are designed and manufactured by us
- We use Branded suitable gauges for machining
- This is complimented by CMM inspection facilities enabling us to inspect components to micron accuracy and directly against an electronic model of the design.
- We provide a fast and flexible machining service.
- We deliver the goods: defect-free, complex, critical precision machined components and assemblies.
- We deliver the service: our superior technology and lean systems reduce costs while improving quality and speed of delivery.
- We deliver on a promise: a working partnership with our customers streamlines production and high on-time delivery rate.
CNC Turning
Machine Specification – Jobber
Capacity
| Swing over bed | Ø 410 mm |
| Swing over carriage | Ø 250 mm |
| Distance between centres | 425 mm |
| Maximum turning dia | Ø 250 mm |
| Maximum turning length | 350 mm |
Main Spindle
| Spindle nose | A2-5 |
| Bore thro’ spindle | Ø 40 mm |
| Maximum bar capacity | Ø 25 mm |
| Chuck size | 165 mm |
| Front bearing bore | Ø 70 mm |
Spindle Drive
| AC Motor rated power | 5.5 / 7.5 kw |
| Speed range (inf.variable) | 0 – 3500 rpm |
| Full power range | 882 – 2650 rpm |
Axis Slides
| X – axis stroke | 130 mm |
| Z – axis stroke | 350 mm |
| Feed rate ( inf.variable) | 0 – 5000 mm/min |
| Threading pitch | 25 mm |
| Ball screw dia x pitch X | Ø 25 x 5 (Pitch) |
| Ball screw dia x pitch Z | Ø 25 x 5 (Pitch) |
TailStock
| Quill diameter | Ø 50 mm |
| Quill stroke | 120 mm |
| Taper in quill | MT4 |
| Thrust (adjustable) (Max) | 300 Kgf |
| Tailstock base travel |
Turret
| No. of stations | 8 |
| Maximum boring bar dia | 32 mm |
| Tool cross section | 20 x 20 mm |
| WEIGHT (Approx.) | 3500 Kg |
| DIMENSIONS (Approx.) | 2500 x 1404 x 1650 mm |
Tank Capacity
| Lubrication tank | 4 lts |
| Hydraulic tank | 40 lts |
| Coolant tank | 95 lts |
2.Machine Specification – LAL-2
Capacity
| Swing over bed | Ø 480 mm |
| Admit between centres | 550 mm |
| Maximum Turning Length | 500 mm |
| Maximum Turning Diameter | Ø 250 mm |
| Chuck Size | Ø 210 mm ( 8″ ) |
Spindle
| Spindle nose | A2-6 |
| Spindle inside taper | MT-6 |
| Hole Through Spindle | Ø 56 mm |
| Maximum bar capacity | Ø 42 mm |
| Spindle speed – std | 110 – 3500 rpm |
| Spindle speed – M version | 40 – 3500 rpm |
| Spindle motor power | AC 5.5/7.5 KW (Cont./30 min) |
| Maximum weight of Load – End free (including Chucks) | 200 kg |
| Maximum weight of Load – with centre (including Chucks) | 300 kg |
Turret
| No. of tool stations | 8 |
| OD tool shank | 25 mm |
| Maximum Boring Bar Diameter | Ø 40 mm |
| Indexing Time | 0.8 sec |
TailStock
| Quill | Ø 75 mm |
| Quill taper | MT4 |
| Quill sroke, programmable | 100 mm |
General
| Machine Size (Length x Breadth x Height) | 2360 x 1260 x 1700 |
| Voltage | AC415 ± 10% V |
| CNC System | Fanuc 0TD |
Tank Capacity
| Lubrication tank | 3 lts |
| Hydraulic tank | 32 lts |
| Coolant tank | 90 lts |