VERTICAL MACHINING CENTER

  • We do machining of all materials like Aluminum, Steel, Cast iron, SG, Forging materials.
  • We are Supplying products into a wide range of Industy Sectors
  • Components machining are done through CNC turning centre, CNC vertical turning lathe (VTL), CNC Vertical machining centre (VMC), Conventional lathe etc.
  • Our in house machining department can carry out milling, drilling, tapping, grinding and turning to meet all customers machining needs.
  • Jig & fixture are designed and manufactured by us
  • We use Branded suitable gauges for machining
  • This is complimented by CMM inspection facilities enabling us to inspect components to micron accuracy and directly against an electronic model of the design.
  • We provide a fast and flexible machining service.
  • We deliver the goods: defect-free, complex, critical precision machined components and assemblies.
  • We deliver the service: our superior technology and lean systems reduce costs while improving quality and speed of delivery.
  • We deliver on a promise: a working partnership with our customers streamlines production and high on-time delivery rate.

1.Machine Specification – HWACHEON SIRIUS 550

Capacity

X/Y/Z axis travel1150 / 550 / 550 mm
Distance from table surface to spindle nose150 – 700 mm
Distance from column to spindle center580 mm

Table

Surface (L x W)1300 x 550 mm
Max weight on table800 kgf
T-slots18H8 / 100 / 5EA mm (W-P-No)

Spindle

Max speed10000 rpm
Bearing IDØ 70 mm
Taper holeNT # 40 (7/24 Taper)

Feed Rate

Rapid (X/Y/Z)40/40/30 m/min
Max cutting24 m/min

ATC

Tool shankMAS-403-BT40 (USA:CAT 40)
Tool capacity30
Max tool diameterØ 85 – 170 mm
Max tool length250 mm
Max tool weight6 kgs

Motor

Spindle5.5 / 7.5 kw
Feed (X/Y/Z)3.0/3.0/4.0 kw
Coolant pump0.4 + 0.9 kw

General

SystemFANUC 0i-MB
Dimension of machine3000 x 3005 x 3000 mm
Weight7000 kgf

Power Source

Electrical power25 KVA
Electrical VoltageAC 220/200 ± 10% Volt
Compressed air0.5 – 0.7 Mpa

Tank Capacity

Coolant tank300 lts

2.Machine Specification – LEADWELL MCV 1100

Capacity

X-axis travel1100 mm
Y-axis travel610 mm
Z-axis travel610 mm
Distance from table top to spindle end120-730 mm
Spindle center to column660 mm

Table (Pallet)

Working surface (height x width)1300 x 600 mm
Permissible mass of workpiece1000 kg
T-slots18H8 / 100 / 5EA mm (W x P x No)

Spindle

Spindle speed8000 rpm
Spindle nose (nominal size, NO.)No. 40

Feed Rate

Rapid traverse XY/Z15/15 m/min
Max.cutting5 m/min

ATC

Tool storage capacity (armless type opt.)24 (20/16)
Max.tool diameter (with adjacent tools)90 mm (150mm – No adjacent)
Max. tool length250 mm
Max tool weight7 kgs
ATC time T/T4 sec
ATC time C/C5 sec

Motor

Spindle motor FANUC11 kw
X,Y,Z – axis feed motors2.1/2.1/2.1 kw

Machine Size

Dimension of machine3,000 x 2,280 x 2685 mm
Power requirement25 KVA
Air Source0.6 Mpa or 6 Bar (6kg/cm2)

Tank Capacity

Lubrication tank4 lts
Hydraulic tank10 lts
Coolant tank450 lts

3.Machine Specification – HASS

Travel

X-axis406 mm
Y-axis305 mm
Z-axis254 mm

Table

Length (total)914 mm
Length (work surface)730 mm
Width305 mm
Max weight on table227 kg

T -Slots

T-slot width15.875 mm
Number of T-slots3
Center distance110 mm

Spindle

Taper size#40 Taper
Speed0-10000 rpm
TransmissionBelt-Driven
Max torque23 Nm @ 2400 rpm
Spindle motor max rating11.2 kw
Spindle nose to table top102-356 mm

Brushless Axis Motors

Max rating2.24 kw
Max thrust rating8896 N

Feed Rate

Max rapids30.5 m/min
Max.cutting21.2 m/min

Tool Changer

Capacity10
TypeCT 40
Max tool diameter89 mm
Max tool weight5.4 kgs

Accuracy

Positioning+/- 0.0051 mm
Repeatability+/- 0.0025 mm

General

Air Required6.9 bar, 113 lpm
Air Required208 VAC 3-Phase, 50A

Tank Capacity

Lubrication tank2 lts
Coolant tank90 lts